PRODUCTS / Sheet fed Inks / GLEITSMANN GLOSS VARNISH Z 377

The main advantage of these two varnishes consists in a special binding agent combining a larger number of technical advantages in one product.


-excellent brilliance
-short drying time
-extraordinary piling properties
-neutral colouring
-very good abrasion resistance 
-unproblematic processing with or without water.

Pile height and possible powder quantity depend on the amount of the coating as well as on the quality of the printing substrate.Very good piling properties ,(no blocking with normal coating),does not dispense the printer from controlling.

A slight drying assistance by IR drying enables faster processing.

Especially the neutral colouring without yellow cast recommends the varnish also for thick coating on sensible colours such as shades of light grey or blue.

The high-gloss varnish Z 375 N/N is the wet-on-wet formula of the high-gloss varnish Z 377 and avoids during inline varnish the transmission of the previously printed colours.

In all other aspects the high-gloss varnish Z 375 N/N correponds to the high gloss varnish Z 377.

Processing without problems and blamless printing results are ensured also with higher colour parts of the beforehand printed inks.


This technical instruction sheet is designed for your information and reference. It is based on and conforms to our current knowledge. However as actual application is affected by many factors over which we have no control, we are not liable for printing failures.